Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-646006.png)
1. Position oxygen sensors behind catalytic converter -2- by hand and screw in as far as possible.
2. Tighten oxygen sensors using special tool. Tightening torque: 37 ftlb.
3. Lay oxygen sensor cable and press into clips. Fit cable plugs -1 and 2-.
Subsequent work
Subsequent work: Installing oxygen sensors behind catalytic converter
1. Fit engine compartment covers.
2. Install design cover.
3. Fasten bonnet.
