Cayenne (9PA) V6-3.2L (2006)
4. Tighten fastening nuts on catalytic converter flange. Tightening torque: 17 ftlb.
5. Replace exhaust clamps. The threaded joints must be pointing downwards. The inclination of the exhaust clamps must be adjusted. Adjustment
value: 7.5 degrees. Tightening torque: 44 ftlb..
6. Tighten the catalytic converter holder on the body (M8 screws). Tightening torque: 17 ftlb.
Subsequent work
Subsequent work: Installing main catalytic converter
1. Install front cardan shaft.
2. Install engine guard.