Cayenne (9PA) V6-3.2L (2006)
NOTE: When installing the fuel distributor pipe, make sure that the fuel injectors do not become tilted.
2. Carefully insert the fuel distributor pipe into the cylinder head using both hands.
3. Tighten the fastening screws on the fuel distribution pipe hand-tight. Tighten fastening screws to the specified tightening torque. Tightening
torque: 7.5 ftlb.
4. Fit fuel hose to the connection for the fuel distributor pipe and secure with a spring-band clamp -1-. Loosen and remove clamp -2-.
5. Connect the line for the fuel injectors to the fuel distributor pipe -arrow A- and press it into the brackets -arrows B- until the locking lugs -C-
engage audibly.
6. Push connectors onto the fuel injectors -arrows A- until the locking lugs -B- are felt to engage.