Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-741003.png)
NOTE: Mark hall sender cable plugs according to position of exhaust and inlet camshafts.
2. Pull off cable plug on camshaft hall senders -top section of figure-. To do this, use an angled piece of wire to pull off the cable plug as described.
Release the cable plugs on the inlet -2- and outlet -3-camshaft hall senders -arrows D- and pull them off -arrows E-.
3. Unscrew the two fastening nuts for the engine wire harness on the top chain case lid -1- and push the engine wire harness to the plenum panel.
