Cayenne (9PA) V6-3.2L (2006)
Transmission Position Switch/Sensor: Procedures
Removing and installing multi-functional switch
Preliminary work for multi-functional switch
1. Remove engine guard.
Removing multi-functional switch
Overview of multi-functional switch
Note:
^
To unscrew the cardan shaft bolts, a second fitter should sit in the vehicle and block the drive harness by actuating the foot brake.
^
The color markings, match points -arrows-, on the cardan shaft and on the all-wheel final drive flange must be aligned. This will neutralize the
residual imbalance of the components.
^
Apply another color marking if necessary. Front cardan shaft match points
1. Move selector lever to position N.