Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1002.png)
4. Undo the fastening screw -Arrow 3- and remove the antenna amplifier -Arrow B-.
Installing control unit for antenna amplifier
1. Position antenna amplifier in installation position -Arrow A- and secure with the fastening screw-Arrow 3-.
2. Position ground strap in installation position -Arrow B- and screw on the fastening nut -Arrow 2-, but do not tighten.
3. Secure ground lead and ground strap with fastening screw -Arrow 1- , then tighten fastening nut -Arrow 2-.
4. Push antenna leads onto the antenna amplifier -Arrow A- until the locking tabs -Arrows B- are felt to engage.
5. Push on the plugs for the antenna leads -a- and the power supply -b--Arrows C-.
6. Secure leads with adhesive tape -Arrow D-.
Subsequent work
Install top cover of rear spoiler.
