Cayenne (9PA) V6-3.2L (2006)
Air Bag: Removal and Replacement
Removing and Installing Driver's Airbag Unit
Removing And Installing Driver's Airbag Unit
Removing driver's airbag unit
WARNING:
Danger of injury and material damage if airbag units are not handled correctly.
-
Always observe the safety regulations for handling airbag units - The airbag unit must always be stowed so that the airbag opening faces
upwards.
-
If removed for an extended period, the airbag unit must be kept in a locked place.
-
Switch off ignition and leave ignition key inserted (steering must not be locked). Disconnect battery. Route or isolate ground strap so that
all contact with a ground carrier (e.g. body, seat frame) is avoided.
-
After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.
1. Switch on the ignition and move the steering wheel back and down as far as possible.
2. Disconnect the battery
3. Turn steering wheel 90 degrees to the right -arrow A-. Undoing airbag unit
4. Insert a long hexagon-socket wrench (size 3 with ball head) fully into the opening on the back of the steering wheel -arrow C-, press the strap
outwards -arrow D- and pull the airbag unit.