Cayenne (9PA) V6-3.2L (2006)
Installing passenger's airbag unit
1. Position airbag unit on the dashboard, put on and hand-tighten the fastening screws -arrows B- and -arrows A-.
WARNING:
Danger of injury caused by loose, safety-related bolts.
-
Always replace fastening screws of the after customer service and reworking.
-
Never make alterations to the micro-encapsulated screws, which have a negative effect on the bond (e.g. using lubricant, loosening
bolts and screwing them down again).
2. First tighten the fastening screws -arrows B- on the dashboard, then the fastening screws -arrows A- on the assembly tube. - Tightening torque:
10.0 (7.5 ft lb.) Nm - Tightening torque: 10.0 (7.5 ft lb.) Nm
3. Insert plug -arrow A- until the lock -arrow B- is felt to engage.
Subsequent work
1. Install glove compartment.
2. Install cover under dashboard on right.
3. Carry out work instruction after disconnecting the battery.