Cayenne (9PA) V6-3.2L (2006)
9. Follow the instructions on the Tester. Press .>>" and perform the test using the default sequence.
9.1. Seat empty - the passenger's seat must be empty. The Passenger Airbag Off indicator light in the centre console must not come on. To
determine the status, press .F7" or .F8". Then press .>>".
9.2. Child - place the special tool test weight P 9742 on the passenger's seat. The Passenger Airbag Off indicator light in the centre console must
come on. To determine the status, press .F7" or .F8". Then press .>>".
9.3. Adult - get an assistant, for example, to sit on the passenger's seat. The Passenger Airbag Off indicator light in the centre console must not
come on. To determine the status, press .F7" or .F8". Then press .>>".
9.4. Seat jammed - the passenger's seat must be empty. The seat must also be relieved of any pressure, e.g. by lifting the seat up with your hand.
The Passenger Airbag Off indicator light in the centre console must come on. In addition to the Airbag Off indicator light, a message is
displayed in the instrument cluster: Check passenger seat adjustment. To determine the status, press .F7" or .F8". Then press .>>".
10. To check the system, select the Actual values menu under the AWS control unit. Then press .>>".
10.1. Select the Weight group (0-4) and Gross weight calibrated options.
10.1.1. If there is no weight on the passenger's seat, compare values (see table below) using the PIWIS Tester. The Passenger Airbag Off
indicator light in the centre console must not come on.
10.1.2. Place the special tool test weight P 9742 on the passenger's seat. The Passenger Airbag Off indicator light in the centre console
must come on. Compare values (see table below) using the PIWIS Tester.
10.1.3. Get an assistant with a body weight of more than 55 kg, for example, to sit on the passenger's seat. The Passenger Airbag Off
indicator light in the centre console must not come on. Compare values (see table below) using the PIWIS Tester.
11. Read out and erase the fault memories in the Airbag and AWS control unit, perform a test drive and then read out the fault memories again. If
faults are found, determine the cause using the PIWIS Tester and correct the faults.