Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1441001.png)
Seat Belt Height Adjuster: Service and Repair
Removing and Installing Rear Adjustment Fitting
Removing And Installing Rear Adjustment Fitting
Removing rear adjustment fitting and support plate
Removing rear adjustment fitting
WARNING: The support plate with threaded parts will be damaged in the event of impact with seat belt buckled.
-
Damage to the support plate can lead to impairment in functional capability of the restraint system and personal injury as a consequence.
-
When replacing the safety belt following accident damage, the support plate of the adjustment fitting and the threaded parts must also be
replaced for safety reasons.
1. Remove C-pillar trim.
2. Position adjustment fitting so that the upper fastening screw is accessible.
3. Unscrew fastening screw -1-.
