Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1441002.png)
4. Fold adjustment fitting inwards -arrow A- and remove upwards -arrow B-.
Removing support plate for rear adjustment fitting
1. Unscrew fastening screw -1- and remove support plate.
Installing rear adjustment fitting and support plate
Installing support plate for rear adjustment fitting
NOTE: For safety reasons, the fastening screw -1- for the adjustment fitting support plate must be replaced after removal.
1. Insert rear support plate. Ensure that the tabs -A- lie inside the spacer sleeves.
