Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1442004.png)
2. Insert the shaft into the adjustment fitting -arrow B- until you feel the locking tabs -arrows C- engage. Turn the spindle -a- slightly, if necessary.
NOTE: The fastening screws for the support plate -arrow 5- and adjustment fitting must be replaced following removal for safety reasons.
3. Engage the adjustment fitting at the bottom -arrow- and tighten at the top with the fastening screw -arrow 5-. Tightening torque: 3.0 ft lb.
