porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Rear Adjustment Fitting|Page 7365 > < Removing and Installing Rear Adjustment Fitting|Page 7363
Page 5
background image

4. Screw the adjusting motor on securely using the fastening screws -arrows 4-.  Tightening torque: 1.5 (1.0 ft lb.) Nm

5. Push plug connection together -arrows A- until the locking lug -arrow B- is felt to engage.

6. Push the plug connection onto the clip -arrow C- until you feel the locking hook -arrow D- engage.

Removing and Installing Rear Adjustment Fitting|Page 7365 > < Removing and Installing Rear Adjustment Fitting|Page 7363