Cayenne (9PA) V6-3.2L (2006)
information on the packaging.
ATTENTION Danger of scalding with hot coolant!
^
Never open the cooling system when it is hot. Emerging coolant may be very hot and can cause scalding.
^
The cooling system must be depressurized before being opened.
^
Allow engine to cool down.
1. Pull off cable plug of the coolant temperature sensor -arrow-.
Note: Even when the coolant has been completely drained, coolant emerges from the open bore on the coolant temperature sensor!
2. Unscrew the coolant temperature sensor using a ring wrench (a/f 22) -see picture-. Absorb emerging coolant.
Installing coolant temperature sensor
1. Clean sealing surfaces and screw in coolant temperature sensor with a new sealing ring into the distributor pipe. Tightening torque: 22 ft-lb.