porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuse Element In Power Distributor|Page 5413 > < Removing and Installing Fuse Element In Power Distributor|Page 5411
Page 4
background image

2. Push in cover of power distributor from front to back -arrow A-and press on -arrow B- until the latch engages.

NOTE:  Only for vehicles with auxiliary battery

3. Connect the line for the auxiliary battery to the threaded bolts -arrow A- and tighten with the fastening nut. -1-. Tightening torque: 15 ftlb.
4. Position battery ground strap on the body and screw it on tight with the fastening nut -arrow 2-. Tightening torque: 15 ftlb.

Removing and Installing Fuse Element In Power Distributor|Page 5413 > < Removing and Installing Fuse Element In Power Distributor|Page 5411