Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1091005.png)
ATTENTION:
Risk of material damage to screw connections for seat and seat frame.
-
The fastening screws for seat and seat frame are coated and must be replaced after being unscrewed.
-
Before screwing in the new fastening screws, clean the thread holes with an M10 x 1.5 tap.
5. Move the seat in its folded position towards the rear -arrow A-and then tip forward -arrow B-.
6. Screw in fastening screws -arrows 1-. Tightening torque: 33 ftlb.
7. Clip in front seat trim -arrow C-.
Subsequent work
Carry out work instruction after disconnecting the battery.
