Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1099005.png)
23. Undo fastening nut -9- and remove line -Arrow B-.
24. Unscrew fastening nuts -10- and remove Tyco switch -Arrow C-.
25. Undo fastening nut -11- and remove line -Arrow A-.
26. Release fuse carrier -Arrow B- and remove it from brackets -Arrows C-.
27. Undo fastening nut -12- and remove line -Arrow A-.
28. Undo fastening nuts -13- and remove lines -Arrow B-.
29. Remove floor carpeting from the work area.
30. Cut open tie-wraps -C- and remove the wire harness -Arrows D-.
Installing central electrical system power distributor
NOTE: Always use new self-locking nuts to fasten the lines and retainers.
1. Place wire harness in the installation position -Arrows A-.
