Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1115011.png)
2. Insert DME control module in the retaining clips -arrow A- and close the retaining clips -arrow B-.
3. Mount ground straps together with the twist lock on the stud and screw down with the fastening nut -1-. Tightening torque: 6.5 ftlb.
Subsequent work
1. Install DME control module.
2. Install cowl panel cover.
3. Connect the battery and carry out work instructions after disconnecting the battery.
Reworking Main Wire Harness
Reworking Main Wire Harness
Tools
