Cayenne (9PA) V6-32L (2006) | Starting and Charging | Power Distribution | Wiring Harness
Wiring Harness: Removal and Replacement
Installing Wiring Harness For Engine
Installing Wiring Harness For Engine (V6)
Overview
Installing wire harness for engine (V6)
1. Clip line to valve cover.
1.1. Position wire harness on the engine.
1.2. Insert wire harness in the clip -Arrow A-, then close clip -Arrow B- until the locking tabs -C- are felt to engage.
1.3. Place line in installation position -Arrows D- and close clips -Arrows E- until locking tabs are felt to engage.
2. Combination valve for secondary air system: Push on vacuum hose and fasten ground strap.
2.1. Push on the vacuum hose -arrow-.
2.2. Tighten ground strap with fastening screw -6-. Tightening torque: 6 ftlb..