Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1116010.png)
30. Push connector onto DME control module and fasten ground straps.
30.1. Fit ground strap together with the twist lock on the threaded bolt -Arrow A- bolt and screw down with the fastening nut -2-. Tightening
torque: 6 ftlb.
30.2. Push connector onto DME control module -Arrow C- and press in the lock -Arrow D- until it is felt to engage.
31. Fasten wire harness in plenum panel on the left.
31.1. Insert line in the clips -Arrow A- and close clips until the locking tabs are felt to engage -Arrow B-.
32. Insert lines for relay carrier in plenum panel E-box.
32.1. Insert connectors -Arrows A-.
32.2. Push plug connection together -Arrows B-.
32.3. Insert rubber sleeve into relay carrier -Arrow C-.
