Cayenne (9PA) V6-3.2L (2006)
7. Open clips -Arrows A- and remove line -Arrow B-.
8. Open clip (brake assist system) -Arrows C- and remove line -Arrow D-.
9. Open clip (firewall) -Arrow A- and remove line -Arrow B-.
10. Press out the rubber sleeve (firewall) to the inside -Arrows C-.
Remove main wire harness - dashboard area and centre console.
Removing main wiring harness - engine compartment on right
Remove right front wheel housing liner.
Remove right front main headlight.
1. Push in latch -b- on connector for sensor -a- until it is felt to engage -Arrow A-.