Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1116030.png)
2. Release locking mechanism latch -b--Arrow B- and pull connector off the sensor -a--Arrow C-.
3. Remove line together with lock carrier support -Arrow D-.
4. Turn bulb holder (wheel housing) slightly and remove -Arrow A-.
Only for vehicles with tyre pressure monitoring system
5. Release connector on antenna for tyre pressure monitoring system -Arrow B- and pull it off -Arrow C-.
Remove front apron.
6. Release plug connection to front apron -Arrow A- and disconnect -Arrow B-.
7. Unscrew fastening nut -1- (front side member wheel housing) and remove ground straps together with twist lock -a--Arrow C-.
8. Open clip -Arrow D- and remove line -Arrow E-.
9. Release connector on headlight housing -Arrow A- and pull it off -Arrow B-.
