Cayenne (9PA) V6-3.2L (2006)
2. Release connector of antenna for tyre pressure monitoring system (rear wheel housing) -Arrow A- and disconnect it -Arrow B-
3. Loosen the five fastening screws on the carbon canister (tank) and the two on the degassing tank in the right wheel housing -arrows-.
NOTE: In USA vehicles, the rubber hose -1- of the leak diagnosis pump is extremely tight. If the hose is pulled, the filler neck can break off at
the leak diagnosis pump.
4. Release connector on carbon canister -2- and on leak diagnosis pump (USA) -3- and disconnect.
5. Fix carbon canister and degassing tank to the bracket with the fastening screws, but do not tighten.
6. Unclip plug connection (rear wheel housing) -Arrow A-.
7. Release connector -Arrow B- and disconnect plug connection-Arrows C-.