Cayenne (9PA) V6-3.2L (2006)
5. Screw on fastening screw -arrow 4- and tighten. Then tighten the fastening nuts -arrows 5-.
6. Position protective tube in installation position -arrow B- and secure with the fastening screw -arrow 3-.
7. Attach the line to the threaded bolt -arrow A- and secure with the fastening nut -arrow 2-. Tightening torque: 6 ftlb.
8. Connect the line to the B+connection -arrow B- and secure with the fastening nut -arrow 1-. Tightening torque: 11 ftlb.
9. Place protection cap on the B+connection -arrow C-.
10. Put heat protection cover around solenoid switch -arrows A- and fasten with the push buttons -arrows B-.