Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1151007.png)
Camber is adjusted at camber eccentric -A-.
Adjusting front axle caster
Specified tightening torque for fastening nut to caster eccentric -B- = 133 ft lb.
Caster is adjusted at caster eccentric -B-.
Adjusting front axle toe
WARNING:
Risk due to malfunction in PSM control range if steering angle sensor is uncalibrated or incorrectly calibrated.
^
Injury and material damage possible.
^
Calibrate steering angle sensor with wheels in straight-ahead position using the Porsche System Tester.
^
The steering angle sensor actual value must be checked after a suspension alignment where no changes have been made to the wheel
alignment values.
The steering angle sensor must be calibrated if the previous wheel alignment values (on rear and/or front axle) were changed!
