Cayenne (9PA) V6-3.2L (2006)
Steering Angle Sensor: Removal and Replacement
Removing and installing steering-angle sensor
General information
The steering-angle sensor is integrated into the - steering column switch.
The steering angle is recorded in the contact unit for airbags (spiral spring) -C-. The sensed data is sent from the electronic unit -E- via the drive CAN
bus to various systems (e.g., PSM, corner-sensitive headlight) for further processing. Replacement of the steering angle sensor requires the steering
column switch to be removed.
If faults have been diagnosed on the steering-angle sensor, the steering column switch must be disassembled into the components -A, B, C, D, E-.
It is only permissible to replace the steering-angle sensor as the combination of the components contact unit for airbag -C- (spiral spring) and
electronic unit -E-.