Cayenne (9PA) V6-3.2L (2006)
Note:
^
The engine does not have to be removed in order to remove and install the hydraulic pump.
^
The hydraulic pump in the V6 engine is accessible from beneath.
Note:
^
Before removing the cover of the air cleaner box, the intake manifold must be disengaged from the air cleaner housing.
^
Loosen the pulley of the hydraulic pump before removing the drive belt.
1. Remove the left engine compartment cover.
Note:
^
Before removing the cover of the air cleaner box, the intake manifold must be disengaged from the air cleaner housing.
^
Loosen the pulley of the hydraulic pump before removing the drive belt.
2. Disconnect intake manifold at the air cleaner cover. To do this, turn the -pins 180°- and pull them out. Then set the intake manifold aside.
3. Remove air cleaner.
Removing hydraulic pump (Cayenne V6)
Note:
^
The engine does not have to be removed in order to remove and install the hydraulic pump.
^
The hydraulic pump in the V6 engine is accessible from beneath.
Note:
^
Before removing the cover of the air cleaner box, the intake manifold must be disengaged from the air cleaner housing.
^
Loosen the pulley of the hydraulic pump before removing the drive belt.