Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1239001.png)
Control Arm: Service and Repair
Front Suspension/Replacing Bearing For Trailing Arm
Replacing bearing for trailing arm
Tools
Preliminary work
1. Raise the vehicle and remove wheel.
2. Remove lower trailing arm.
General warning notes
ATTENTION:
Increased risk of accidents when working with hydraulic presses - danger of crushing, deformation of components.
^
Risk of injury if the threaded rod in the tubular piston cylinder breaks because of pressure or traction.
^
Possible danger of damage or injury.
^
The worker must always stand away from the direction of pressure or traction on the threaded rod when using the tubular piston
cylinder.
^
Position pressure pieces correctly and ensure that they are seated properly.
^
Watch out for falling parts when working with hydraulic presses.
^
Danger of injury and material damage if the wheel carrier is raised incorrectly.
^
Do not damage the brake cover plate.
ATTENTION:
Increased risk of accidents if the wheel carrier is raised improperly!
^
Injuries and material damage are possible.
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
^
When raising the suspension, use a suitable intermediate layer (hard rubber).
^
Do not damage the brake cover plate.
Tools and materials
