Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1240004.png)
5. Mark eccentric screws -arrow- for adjusting camber and caster on subframe (facilitates fitting when reinstalling).
6. Then remove eccentric screws. When doing so, ensure that joint boot is not damaged by eccentric -arrow-. Pull (press) axle strut out of the
subframe mounting points -A-.
7. Remove fastening nut -Inset 5- from ball joint. Tilt -trailing armdown all the way and pull ball joint carefully out of the wheel carrier.
Installing lower axle strut
Installing lower trailing arm
