Cayenne (9PA) V6-3.2L (2006)
ATTENTION:
Increased risk of accidents if the wheel carrier is raised improperly!
^
Injuries and material damage are possible.
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
^
When raising the suspension, use a suitable intermediate layer (hard rubber).
^
Do not damage the brake cover plate.
1. Install in reverse order.
Note:
^
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is being raised with a universal vehicle lift. -Dimension X-, from Control value: 502 mm ± 10 mm corresponds to the vehicle position.
^
Visually inspect all parts.
^
Replace self-locking nuts.
^
Replace all expansion screws (screws which are fitted with torque angle tightening procedure).
^
Use correct tightening torques and torque angle.