Cayenne (9PA) V6-3.2L (2006)
6. Remove the fastening screw for the connecting link/spring strut on the wheel carrier. To do this, use a suitable - lift with rubber base in order to
prevent slipping. Lay the connecting link aside.
7. Remove the four fastening screws (top) -arrows-.
8. Carefully remove spring strut - downwards -arrow-.
Installing rear spring strut
ATTENTION:
Increased risk of accident due to raising the wheel carrier incorrectly. When filling the air spring struts, the vehicle lifts.
^
Injury and material damage possible.
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a
suitable intermediate layer (hard rubber).
^
Do not damage the brake cover plate.
Note:
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a suitable
intermediate layer (hard rubber).
^
Do not damage the brake cover plate.