Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1278004.png)
^
The entire threaded parts of the axle must be tightened in vehicle position! Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is being raised with a universal vehicle lift! Dimension -X-, from lower edge of wing to middle of axle 506 mm ± 10 mm corresponds
to vehicle position!
^
Carry out a visual inspection of all parts!
^
Replace self-locking nuts!
^
If a new spring strut is fitted, it must be pre-filled to 3 bar in its original packaging.
^
Replace all expansion screws (screws which are fitted with torque angle tightening procedure)!
^
Use correct tightening torques and torque angle!
1. Insert spring strut into vehicle.
2. Fit the four fastening screws -arrows-.
3. Carefully raise the air spring strut using a suitable -figure- lift with rubber base. Then, pull the wheel carrier downwards in order to fit the fastening
screw.
