Cayenne (9PA) V6-3.2L (2006)
tilting the mounting saddle slightly.
1. Clamp the air-spring strut on the lower mounting point (use aluminum protective jaws -A-!).
2. Loosen the fastening screws on the mounting saddle and carefully remove the mounting saddle.
3. Remove spring-strut mount with socket wrench insert 3353 and arm bracket P 9630.
4. Remove clamp.
Note:
When replacing the air spring, always replace the boot/bellows.
If the rolling piston slips out of the outer guide during disassembly, it must be correctly positioned again when assembling.
^
When sliding in the rolling piston, the roller must lie evenly between the outer guide and rolling piston (roll fold).