Cayenne (9PA) V6-3.2L (2006)
Ride Height Sensor: Service and Repair
Removing and Installing Sensor For Body
Removing and installing sensor for body
Preliminary work
Note:
These instructions for removal and installation describe all the sensors for the body (two sensors at the front, one sensor at the rear).
Installation position at front: Position 8, under the left and right wings.
Installation position at rear: Position 8, under the boot floor plate on the right (sensor can be accessed from the interior!).
Front sensor
1. Lift the vehicle.
2. Remove wheel housing liner.
Rear sensor
Note:
For removing and installing the rear sensor, it is not necessary to lift the vehicle.
The rear sensor can be accessed from the interior.