Cayenne (9PA) V6-3.2L (2006)
2. Place the bottom concave washer -see figure- together with the bottom support -see figure- at the correct position (not twisted).
At the correct position means that the two individual parts are fitted precisely together.
3. Place the top concave washer -1- together with the top support -2- at the correct position (not twisted).
At the correct position means that the two individual parts are fitted precisely together.
Assembly
ATTENTION:
Increased risk of accidents due to spring tensioning.
^
Danger of injury and damage from springs jumping out.
^
Never use an impact bolter to loosen or tighten the lock nut.
^
Use a commercially available changeover ratchet.
1. Position the bottom support and bottom spring retainer assembly at the correct position on the shock absorber.
2. Position the pre-tensioned coil spring precisely at the stop in the bottom concave washer -arrow-.
3. Slide the protective sleeve/stop buffer/cap assembly loosely onto the piston rod.