Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1306006.png)
It should be ensured that the separator is not pressing on the seat of the bearing inner race on the wheel hub -.
14. If the wheel hub is used again, remove the -Inner race of the wheel bearing- from the wheel hub. To do this, position the 12 - 115 mm [diameter]
separator NR.111 behind the inner race.
15. Press inner race off the wheel hub. To do this, position the T10205/2 bell (from attachments T10205) without the grip piece. Insert the tubular
piston cylinder vas 6178. Position the T10205/3 pressure piece (from attachments T10205) and the 8-2 nut for the threaded rod (from attachments
T10205). -
16. Remove the -Snap ring-. -
17. Remove the wheel bearing (tools) -.
