Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1327008.png)
3. Position the - circlip with the opening facing downward. When the Seger ring is fitted correctly, the dimension -X- is at least 15 mm. If this
dimension is not reached, the Seger ring must be fitted again. If necessary, carefully press the wheel bearing again.
4. Fit the wheel hub (tools).
Carry out a close visual inspection of the seat of the wheel hub. There must not be scores, grooves or similar deformations on the hub.
5. Position the - wheel hub in the correct position. Position the T10205/10 pressure piece (from attachments T10205) in the correct position on the
wheel hub. Insert the tubular piston cylinder VAS 6178. Position the T10205/6 pressure disc (from attachments T10205) and the T10205/8-2
threaded nut (from attachments T10205) in the correct position. Pull in the wheel hub. Shortly before the stop, the applied force will be between
6.5 ft lb. and 26 ft lb. The maximum assembling force must not exceed 30 ft lb. at the stop.
