Cayenne (9PA) V6-3.2L (2006)
Fluid Line/Hose: Procedures
Removing and installing line for ATF cooling
Preliminary work for line for ATF cooling
1. Remove front cardan shaft.
2. Remove engine carrier.
Preliminary work for line for ATF cooling
1. Remove engine guard .
Removing line for ATF cooling
Overview of ATF line
1. Place collecting pan underneath the vehicle.
WARNING: Danger of scalding and chemical burns from hot ATF
-> Allow ATF to cool down
-> Wear personal protective gear (goggles, gloves)
2. Unscrew fastening screw -arrow- which fastens ATF line to the ATF thermostat and remove line.
ATF line to ATF filter
3. Unscrew ATF line screw connection to engine oil pan and to transmission.
WARNING: Danger of scalding and chemical burns from hot ATF
-> Allow ATF to cool down
-> Wear personal protective gear (goggles, gloves)
4. Unscrew fastening screw securing ATF line to transmission -arrow and remove lines.