Cayenne (9PA) V6-3.2L (2006)
1. Using the bolt adapter from the slide hammer kit 168, screw countersunk head bolt into sealing ring -direction of arrow-.
Preliminary work for removing sealing ring
WARNING: Danger of scalding and chemical burns from hot ATF
-> Allow ATF to cool down
-> Wear personal protective gear (goggles, gloves)
2. Screw on slide hammer from slide hammer kit 168 and remove sealing ring.
Removing the torque-converter sealing ring
Installing the torque-converter sealing ring
Torque converter overview
1. Position new sealing ring on special tool assembly sleeve3295.