Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-827004.png)
1. Remove clutch lever with release bearing. To do this, press the retaining spring -arrow- out of the opening in the clutch lever. Clutch lever
2. Remove guide tube for release bearing. To do this, unscrew four fastening screws -arrow-.
Guide tube screws
Note: There are two depressions in the sealing ring -arrows-. The sheet metal screws for removing the sealing ring are screwed in here.
Depression in sealing ring
3. Screw two sheet metal screws into the sealing ring.
