Cayenne (9PA) V6-3.2L (2006)
Fluid Pressure Sensor/Switch: Procedures
Removing and installing oil pressure switch
Preliminary work for oil pressure switch
1. Remove ATF filter.
Removing oil pressure switch
Oil pressure switch
1. Pull off cable plugs from the two oil pressure switches.
2. Remove oil pressure switch.
Installing oil pressure switch
Oil pressure switch
1. Install oil pressure switch -arrows-. Tightening torque 3.25 ft. lbs.
2. Connect and engage cable plugs on the oil pressure switches.
Touching up the oil pressure switch
Reworking oil pressure switch
1. Install ATF filter.