Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-841005.png)
14. Position electric plug connection -arrow- on the selector frame.
15. Install the transverse strut of the centre console -arrows-.
16. Position cable connection on the underside of the selector lever cover.
17. Install selector lever cover. Make sure that the wiring harness -direction of arrow- is not pinched in the selector frame.
18. Position cable connection on the underside -inset- of the centre console cover.
19. Insert centre console cover at the front and tip backwards. Screw in two screws -right arrows-.
20. Functional test of gear selecting system:
^
Will the vehicle start?
^
Do all the selector lever positions work?
