porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Thermostat, Transmission Cooling|Service and Repair|Page 4121 > < Thermostat, Transmission Cooling|Service and Repair
Page 2
background image

Suction line

3. Disconnect suction line from engine. To do this, remove locking clip -arrow- and pull off the line.

4. Place oil collecting container underneath the vehicle. 

ATF cooler line at thermostat

WARNING:  Danger of scalding and chemical burns from hot ATF

-> Allow ATF to cool down
-> Wear personal protective gear (goggles, gloves)
 

Note:  Counter when loosening the ATF lines. 

Note:  To prevent oil from spreading into the body front section, a material discharge chute 00000 should be held underneath. 

5. Undo ATF line screw connection on cooler side -arrow- at the thermostat.

Thermostat, Transmission Cooling|Service and Repair|Page 4121 > < Thermostat, Transmission Cooling|Service and Repair