Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-844003.png)
ATF line to thermostat
6. Unscrew ATF line fastening screw -arrow- to thermostat
7. Unscrew ATF thermostat fastening screw -arrow- to cooler. ATF thermostat on cooler
Discharge chute
Note: To prevent oil from spreading into the body front section, a material discharge chute 00000 should be held underneath.
8. Hold shop-made tool (material) discharge chute 00000-figure under ATF thermostat.
9. Disconnect ATF lines from thermostat and drain off ATF.
10. Remove thermostat.
Removing ATF thermostat
