Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-844005.png)
ATF thermostat on cooler
4. Unscrew ATF thermostat fastening screw -Arrow- to cooler.
Discharge chute
Note: To prevent oil from spreading into the body front section, a material discharge chute 00000 should be held underneath.
5. Hold shop-made tool (material) discharge chute 00000-figure under ATF thermostat.
6. Disconnect ATF lines from thermostat and drain off ATF.
7. Remove thermostat.
Installing ATF thermostat