Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-844006.png)
Overview of ATF cooler
Note: The sealing rings at the ends of the ATF lines on the transmission and cooler sides must be replaced before installation.
1. Replace sealing rings on the ATF lines and coat with ATF.
2. Connect transmission-side ATF lines to thermostat. Insert the upper line first.
3. Insert ATF cooler lines.
ATF thermostat on cooler
4. Tighten ATF thermostat fastening screw -arrow- to cooler. Tightening torque 2.5 ft. lbs.
ATF line to thermostat
