porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 4146 > < Procedures|Page 4144
Page 3
background image

Retaining clip for ATF cooler

2. Install retaining clips -arrow- on ATF cooler. 

ATF cooler

3. Screw in ATF line nuts on thermostat -arrow-. Tightening torque 22 ft. lbs. 

Check screw and oil drain plug

4. Install the front cross member under the radiators. To do this, tighten the four fastening screws. Tightening torque 17 ft. lbs. 

Procedures|Page 4146 > < Procedures|Page 4144