Cayenne (9PA) V6-3.2L (2006)
1. Remove the front transverse strut under the radiator. To do this, loosen the two fastening screws (M8 x 25) to the left and right.
2. Place oil collection pan under the ATF thermostat.
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)
3. Unscrew nut on ATF line to thermostat -arrow- and drain ATF.
4. Close off line ends.
5. Remove retaining clip -arrow- on ATF cooler.
6. Remove ATF cooler.
Installing ATF cooler
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)