porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Rear Cardan Shaft|Page 4467 > < Removing and Installing Rear Cardan Shaft|Page 4465

Cayenne (9PA) V6-3.2L (2006)

Page 10
background image

5. Screw in new screws for cardan shaft flange at the rear axle transmission. Initial tightening: 22 ftlb.  Final tightening: 90 ° 

6. Tighten bolts connecting cardan shaft triangular flange to transfer box -arrows-. Counter with an open-ended wrench. Tightening torque: 56 ftlb. 

7. Screw in fastening screws for securing cardan shaft centre bearing holder to body -arrows-. Tightening torque: 44 ftlb. 

Note:  

Removing and Installing Rear Cardan Shaft|Page 4467 > < Removing and Installing Rear Cardan Shaft|Page 4465