Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-896004.png)
4. Press out tie rod on wheel carrier with press-out tool T10187. - When pressing out, screw fastening nut on flush (protects the ball joint thread).
5. Release lower spring strut.
6. Remove the lower connecting rod-arrow-.
7. Raise wheel carrier with a suitable lift to the extent that connecting rod and fastening pins for spring strut at the bottom are easy to remove. Use a
-lift with a rubber base- to prevent slipping.
8. Undo bolt connecting lower spring strut to axle strut -arrow-.
9. Unclip cable for wear monitor and release holder on wheel carrier.
10. Disconnect the cable on the ABS sensor.
